User Tools

Site Tools


playground:nmr

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
playground:nmr [2012/04/18 17:24]
carter
playground:nmr [2015/05/20 10:05] (current)
carter
Line 6: Line 6:
    - You may have to adjust the VERTICAL POSITION control to find the horizontal line.    - You may have to adjust the VERTICAL POSITION control to find the horizontal line.
    - Set the HORIZONTAL SWEEP to 60.    - Set the HORIZONTAL SWEEP to 60.
-   - Recycle the analyzing magnet if needed. ​ This is done using the RECYCLE button on the analyzing magnet control window.+   - Recycle the analyzing magnet if needed. ​ This is done using the RECYCLE button on the analyzing magnet control window(NumLock must be off).
    - Set the analyzing magnet power supply to a current slightly lower than the current predicted for this energy.    - Set the analyzing magnet power supply to a current slightly lower than the current predicted for this energy.
    - Set the TUNING VERNIER control to about mid range on its 10 turn control. ​ Rotate counterclockwise until it stops then rotate 5 turns clockwise.    - Set the TUNING VERNIER control to about mid range on its 10 turn control. ​ Rotate counterclockwise until it stops then rotate 5 turns clockwise.
playground/nmr.1334784256.txt.gz ยท Last modified: 2012/04/18 17:24 by carter